Concept Seating 3152 Elite Task Chair
Top Performing Ergonomic Seating
If you’ve ever wished your task chair was a little more roomy, the 3152 is for you. Standard lumbar, seat-depth and back adjustments, a 2:1 recline/tilt ratio, 550-pound weight capacity and a 6-year warranty covering normal wear and tear. The wide seat base provides additional space to move, grow, or both. Whatever the task, this 24/7 chair handles it with ease.
10 Color / Fabric Options
Seven Leg Base
Seven legs means 20% ease of movement and more stability over five leg chairs. This is especially important for larger individuals that find moving in their chair difficult. Steel construction with metal strength ring and tested to 10,000lb dynamic load, our base is unmatched in strength and stability.
Adjustable Lumbar Support
Infinitely adjustable lumbar support puts back pressure relief at your fingertips. Adjustable back insures lumbar is exactly where you want it.
Adjustment Backrest Height
This model also features a height-adjustable backrest. Raise or lower it to one of 6 positions to fit your body type and fine-tune the lumbar support.
Make your chairs new again by swapping out covers and extend the life of your 24/7 chair all within a matter of minutes. The bottom cover is held on by Velcro and the backrest cartridge can be swapped out easily with a screw driver.
Not a better warranty in the business. 24/7 warranty that covers normal wear and tear for people up to 550lbs for 6 years. Compare to a standard warranty that only covers defects in workmanship and parts.
You may not notice it in the first 10 minutes, but you may after the first shift. You will certainly notice it after weeks, months and years of prolonged seating in a Concept Seating chair. You’ll just feel better. You just might not know why. The chair you have just been sitting with its Ergo Air Suspension System has kept the blood and oxygen flowing through your body, especially through the lower extremities improving blood flow and increasing oxygen levels to tissues.
Two point stem, shock absorber and special bore construction provides an extremely smooth and quiet swivel and roll not found in standard casters. Once the chair is sat in, the brake is released and allows the chair to roll freely. This is important for large people that need to put weight on the arms to be able to sit. Spring shock absorber prolongs the life of the caster as well as the chair. Closed Construction reduces the amount of dirt and hair that can get into the caster, prolonging the life of the caster.
Easily adjust the width of the armrests to accommodate a larger person or a person with a duty belt just by sliding out the arms. Adjustment is made by loosening the thumb screw and adjusting to the desired width. Adjustable to 2.5” on both sides.
Height and Depth Adjustment
Our goal is to provide proper ergonomic support for 4% female size (approximately 5’ 0”) to the 97% male (approximately 6’ 5”). Height and depth adjustments are at your fingertips.
Five Position Lock Tilt
Recline to one of five desired positions and keep it there with the push of a button.
2:1 Recline Ratio
The 2:1 Syncro tilt keeps your knees and legs in an ergonomically correct position while allowing you to comfortably recline. For every 2 degrees of back recline, the seat reclines 1 degree maintaining ergonomic comfort.
This chair comes with a slight forward tilt. This position can be locked out to prevent the forward tilt.